× You're looking at the old version of the wiki! As of January 2020, all pages have been migrated to the new site at: http://wiki.speeduino.com

IAT Density

From Speeduino
Revision as of 23:37, 23 April 2019 by Josh (talk | contribs) (Text replacement - "https://raw.githubusercontent.com/noisymime/speeduino/master/reference/wiki/" to "https://raw.githubusercontent.com/speeduino/wiki/master/")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

The IAT density curve represents the change in oxygen density of the inlet charge as temperature rises. The default curve approximately follows the ideal gas law and is suitable for most installations, however if you are seeing very high inlet temperatures (Either due to heat soak in the engine bay or from turbocharging) the you may need to adjust the hot end of this curve.

Settings