Speeduino

theonewithin wrote: ↑Sun Sep 27, 2020 12:11 am Please at least download TS and load the base tune to view what options are available...

What you are asking for mostly exists already in 1 for or another.

If youre talking to me, then what I requested is not available

It is completely possible to just do it though.

There is no need to an additional decoder at all.

theonewithin wrote: ↑Mon Sep 28, 2020 1:34 am It is completely possible to just do it though.

There is no need to an additional decoder at all.

Yeah, its more of a addon to the missing teeth decoder, being able to use map straight and skip resync. Not the best option, I know, but might work well in some cases. Glad this is open source, I might have a look at it myself

In the past adding the Volvo/Jeep/Renault 44-2-2 trigger was discussed (http://speeduino.com/forum/viewtopic.php?p=16594). Any progress on this?

hi guys, i'm new user form italy! i have to be onest, i'm registered to partecipate at this tread.
i'm interested in renix 44-2-2 wheel decoder, and i'm going to attached some info of this.
olso i have a renault engine f7p on the floor, so i can put other information if you need.
thanks in advance!

That 6.1 Hemi V8 is quite an interesting wheel to decode... A bit different from any of the 20 wheels I've seen so far.

That Hemi trigger is pretty weird for sure, but anyway

I would love to use speeduino if it could support Dodge Neon SRT-4 Crank/Cam pattern.

Very close to the HEMI one.

I would like to see the Miata triggers available separately in the settings. So you can chose the regular weird 3-tooth cam pattern, and run a 36-1 on the crank for better resolution. As far as I am aware, running the Miata cam can now only be done with the stock 4-tooth crank trigger.

Thanks,

Hugo

HugoW wrote: ↑Wed Jan 06, 2021 8:09 am I would like to see the Miata triggers available separately in the settings. So you can chose the regular weird 3-tooth cam pattern, and run a 36-1 on the crank for better resolution. As far as I am aware, running the Miata cam can now only be done with the stock 4-tooth crank trigger.

Thanks,

Hugo

I don't quite understand exactly what you want here?

Is the 36-1 an addon?

If you are going to that much effort it is simple to remove a couple of teeth from the cam to get a cam signal supported.