Speeduino

Update: finished building the speeduino board and flashing the arduino with a base map!

Update: finished soldering the harness pin out to the speeduino idc40

Got the TPS calibrated!

https://youtube.com/shorts/SUvxgAaE7mg? ... nXITscC5BG

Making progress! Are the other sensors calibrated and registering, etc? Just my perspective having fried a couple things on metal - I cringe when I see an unlined case with a processor. You may have your solution already, but I at least put an old neoprene mouse pad into the case, or glue to the bottom of the PCB, to ensure nothing shorts to the case. Heck, I do something when it's built, as I've made PCB smoke with a piece of trimmed resistor leg hiding on the bench...

In the video, only the tps was connected. So about that… I accidentally fried the arduino in the video a short time later just as your described. Waiting on a new one!