For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
#68002
Hi, I have a problem with ecu and I cant seem to find the fault. Car runs fine and with no issues part throttle.
When I open throttle 100% it starts to act weird. it feels like ecu protection is kicking in but checking the logs (ill add a file here) ecu prot isn't doing anything. Its jumping to 17afr for like 300ms and then going back to normal. VE table is smooth and plenty of fuel. walbro 255lph pump with 875cc injectors on m52b25 engine. I think this ecu is broken or some sensor is about to die.
Ill add the whole tune file also, maybe somebody can spot the problem :roll:
It seems that the injector duty cycle jumps to 0 at random moments. How can it be ?

thank you.
Attachments
(90.35 KiB) Downloaded 12 times
(829.97 KiB) Downloaded 10 times
#68004
I think your problem is the deceleration enleanment setting.
0 means total fuel cut off on when TPS falls. 90 is the default I think.
I'm looking at 101.715s in the log.
Screenshot 2024-04-17 at 08.52.00.png
Screenshot 2024-04-17 at 08.52.00.png (945 KiB) Viewed 631 times
Screenshot 2024-04-17 at 08.48.46.png
Screenshot 2024-04-17 at 08.48.46.png (335.4 KiB) Viewed 631 times

What is in the stock ECU? some of them don't use a[…]

Jeep transmission compatibility

Wanting to replace the old crappy Chrysler PCM in […]

blitzbox

Hi, It seems I can’t blame the error with t[…]

Thank you all for your input. I have managed to g[…]

Still can't find what you're looking for?