- Mon Apr 08, 2024 3:33 pm
#67849
Hello,
I'm getting seemingly random rpm spikes to (whats reading as) 10k + rpm. its shutting down the engine when that happens at idle. I'm using the factory wiring from the optical sensor (J925). It occurrs with my factory 4 window cas disc, as well as the 24-1 disc (currently installed). other than that occasional blip or stall, its perfect. Ill add a log where I caught it stalling at idle. I can switch back to the stock ecu and cas wheel and it runs normally with no stalling. From what I gather the optical sensors are supposed to be very resistant to EMI, so I'm not sure shielding the signal is all I need? do I need to do something with pri-, sec+, sec-?
Any help is appreciated.
I'm getting seemingly random rpm spikes to (whats reading as) 10k + rpm. its shutting down the engine when that happens at idle. I'm using the factory wiring from the optical sensor (J925). It occurrs with my factory 4 window cas disc, as well as the 24-1 disc (currently installed). other than that occasional blip or stall, its perfect. Ill add a log where I caught it stalling at idle. I can switch back to the stock ecu and cas wheel and it runs normally with no stalling. From what I gather the optical sensors are supposed to be very resistant to EMI, so I'm not sure shielding the signal is all I need? do I need to do something with pri-, sec+, sec-?
Any help is appreciated.
Attachments
(147.19 KiB) Downloaded 11 times