Help with building your Speeduino, installing it, getting it to run etc.
By Skutch
#67566
Good afternoon, I'm having a problem that the engine is shutting off then the car is running. it will run for 2/5 min where is at idle or driving but when to plug the laptop in to dater log it runs fine and then will do for a day or two. I've cheated the basics so any help or ides would be a help. ps the switch on the bored is set at run

If you want the simplest/easiest setup then you c[…]

Tach output and RPM sensor issues

Hi, I am in the process of converting the ignition[…]

BMW E23 M30B28

I'll figure out the tach eventually, but now there[…]

STM32 development

You won't be able to use a carrier board made for […]

Still can't find what you're looking for?