- Thu Mar 14, 2024 10:15 pm
#67515
Hi,
I created a previous topic for help on cold start but my problem become from my vr sensor. So i create a new topic for this problem.
When I crank engine, tuner studio show many pics of RPM. RPM raise to 10 000 while cranking.
I read on internet that a shunt can solve this problem. My VR Conditioner (MAX 9926) already have a shunt on it (4.6k). I removed it in order to increase resistance.
So, I put a resistor of 10k (1/4w) between both wires of crank sensor. This did'nt work. I increase resistor many times and this did'nt work.
I don't know what i can try to solve my problem ?
My trigger edge is setup on falling.
Thanks
Jason
I created a previous topic for help on cold start but my problem become from my vr sensor. So i create a new topic for this problem.
When I crank engine, tuner studio show many pics of RPM. RPM raise to 10 000 while cranking.
I read on internet that a shunt can solve this problem. My VR Conditioner (MAX 9926) already have a shunt on it (4.6k). I removed it in order to increase resistance.
So, I put a resistor of 10k (1/4w) between both wires of crank sensor. This did'nt work. I increase resistor many times and this did'nt work.
I don't know what i can try to solve my problem ?
My trigger edge is setup on falling.
Thanks
Jason