[caveman]

Hey guys, I've been debugging my project for weeks, I have an S1 renesis 13b I'm trying to get started with speeduino. I have the following base tune I've been working with. Yes, the tables are rudimentary, I have not tuned them yet but I am seeking guidance on whether my settings are somewhat sane and if so, how to get my engine going. I have been having several ignition events when switching between flood clear mode and standard cranking. any insight is appreciated. Thanks

[jonbill]

Hi, there are a few other rotary engine threads here, have you found them?
I'd definitely turn off the ego correction while your tuning.
you've got VE table switching enabled, but your 2nd table is all '255'. What's the plan with the 2nd table? is it necessary at this point?
I don't remember what the right setup for 'number of cylinders' is with your rotary, but I think a config of 4 cylinders sequential injection AND staged injection isn't possible on the UA4C.
I think you need to set 2 cylinder, 2 primary injectors then the staging will work.
Hopefully you can find some other reference tunes here for rotaries - or also look at tunes.speeduino.com.