For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
#66839
I ordered the following board, unfortunately I had to buy 10 pieces but I only needed one for my experiments. I am now selling 9 pieces at cost price plus shipping costs to you.

Unlike many others, this board also has a voltage regulator so that it can be supplied with a voltage higher than 5V. But you can also omit this if you supply it directly with 5V.

The part works very well, you get an absolutely stable rectangle. Contrary to the circuit diagram, C4 and C5 can be made slightly smaller <300pF.
Attachments
Dual_VR_Board.png
Dual_VR_Board.png (62.61 KiB) Viewed 1244 times
Dual_VR_Board.jpg
Dual_VR_Board.jpg (287.08 KiB) Viewed 1244 times

Hi there, I'm doing preliminary research and hope[…]

BMW E23 M30B28

Where did the plugs come from? I've heard there ar[…]

Injected 2 stroke Bultaco

Alternator testing. Its a 3 phase circa 200w alter[…]

NO2C crank signal issues

Once again PSIG, thank you. Note this is set up fo[…]

Still can't find what you're looking for?