Just another MEGA2560 based on the dropbear box

Just another MEGA2560 based on the dropbear box#64935

By PedroV9 - Wed Sep 20, 2023 10:19 pm

- Wed Sep 20, 2023 10:19 pm #64935

Hello folks, I made this design based on version 0.4.3d, it uses all the same components except for the Arduino, which here is a Mini PRO (obviously), and two outputs that in version 0.4.3d use DIP mosfets, and in this design, I used TO220.

https://www.pcbway.com/project/sharepro ... zfrD-gkDXA

Note: I have only performed tests on the workbench; I have not yet tested it in the car.

Attachments

Schematic_Speeduino 4.3d - MEGA PRO_PCBWay Community.pdf

(304 KiB) Downloaded 90 times

Capturar3.JPG (40.58 KiB) Viewed 3536 times

Capturar2.JPG (106.3 KiB) Viewed 3536 times

Capturar.JPG (129.94 KiB) Viewed 3536 times

376787675_7099817300028295_9135154236379692176_n.jpg (87.02 KiB) Viewed 3536 times

Re: Just another MEGA2560 based on the dropbear box#65096

By toddTR6 - Mon Oct 02, 2023 5:56 pm

- Mon Oct 02, 2023 5:56 pm #65096

Looks Nice.

What are the dimensions of the board and what is the case you are using?

Re: Just another MEGA2560 based on the dropbear box#65100

By dazq - Mon Oct 02, 2023 10:50 pm

- Mon Oct 02, 2023 10:50 pm #65100

toddTR6 wrote: ↑Mon Oct 02, 2023 5:56 pm Looks Nice.

What are the dimensions of the board and what is the case you are using?

These case are available at AliExpress.
Some of the suppliers post the case dimensions on the listing.

Quantum Coupe with V04 on Ford 1.4CVH,Quantum 2+2 with Custom V04 on Jaguar 3.0l AJ30 V6
mini GPIO :done More soon
CANbus broadcast interface: done
Simple sd logger :done
External CAN io: Inputs :done
Gearbox controller: working