- Sat May 20, 2023 11:52 am
#63097
GRIGUA.jpg (253.92 KiB) Viewed 6667 times
Hi,
I'm Francesco from Italy (sorry for my english), this is my first design, i tried to make a small and economic design that can be integrated via breakout board to the original connector.
The board is based on atmega2560 and use the speeduino v0.4 pinout.
I'm new to pcb design and I have some doubts about some parts of the schematic, especially for the USB communication and the resonator for the atmega
thanks in advance
Francesco
I'm Francesco from Italy (sorry for my english), this is my first design, i tried to make a small and economic design that can be integrated via breakout board to the original connector.
The board is based on atmega2560 and use the speeduino v0.4 pinout.
I'm new to pcb design and I have some doubts about some parts of the schematic, especially for the USB communication and the resonator for the atmega
thanks in advance
Francesco
Attachments
(355.69 KiB) Downloaded 1298 times
- By JHolland