For any discussion not specifically related to your project
User avatar
By Spesh
#61954
Hi,

I use a speeduino 0.4 with a mega.

Secondary serial is used to run a digidash so is already in use.

I'd like to find an easy way to data log on a semi permanent basis, IE the data will log all the time.

I see various options from searching but most threads are unfinished or missing info.


What would be my best option to achieve this? I really don't want to have a pi with tunerstudio running just to log .

I have a teensy 3.5 here so could I get an adapter board and run that in place of the mega and use the onboard SD or is that a dropbear only option?

Thanks in advance
User avatar
By Spesh
#64428
Still not really found a solution for this, Ideally want something that will log from the minute the car starts until it stops like the dropbear does.
Running a k24a2 w/o a chassis

Good point! I guess for starters, is there a trigg[…]

Have you tried Missing Tooth (crank) as a 2-1 wh[…]

BMW E23 M30B28

The issue got worse recently. From the logs I can […]

Cool. 8-) Yes, it's actually simple to do basic[…]

Still can't find what you're looking for?