[Kinetic Research]

Congratulations on a job well done. Can never tell if the lack of updates is due to success or failure on some of these threads, it's obvious you have succeeded stylishly. I am a bit envious of your results.

[lovosal]

Hello,
I can tell you that I like the work you have done, it is very fine and clean, I don't think it will reach that level, haha, but for now. I am satisfied that I manage to start and continue the preparation of my astra G.

I wanted to ask you a question...
In my car I am still in the first start phase, and of. I can't get it at the moment.
I have problems with the. Coil right now and the. Injector too.
And the. Problem now is that I can't find any information about that coil and that injector, lo. Little that I have found I follow thanks to the speeduino Forum and the people who make it up, of course. Best I've ever seen.

The question is, where did you get the data on those Volvo coils? It's to try to find some more information about mine.
Find others that are popular but have the data that is easier to find.
Thank you

[Spidii]

Congratulations on a job well done. Can never tell if the lack of updates is due to success or failure on some of these threads, it's obvious you have succeeded stylishly. I am a bit envious of your results.

Thanks, I'm really happy with how speeduino works, now I just have to adjust the map

[Spidii]

Excellent!

Thanks!

[Spidii]

Hello,
I can tell you that I like the work you have done, it is very fine and clean, I don't think it will reach that level, haha, but for now. I am satisfied that I manage to start and continue the preparation of my astra G.

I wanted to ask you a question...
In my car I am still in the first start phase, and of. I can't get it at the moment.
I have problems with the. Coil right now and the. Injector too.
And the. Problem now is that I can't find any information about that coil and that injector, lo. Little that I have found I follow thanks to the speeduino Forum and the people who make it up, of course. Best I've ever seen.

The question is, where did you get the data on those Volvo coils? It's to try to find some more information about mine.
Find others that are popular but have the data that is easier to find.
Thank you

I have not looked for data on these coils, honestly! but with a current clamp for the oscilloscope and the oscilloscope you can find the charging and dweel times

[Spidii]

This weekend I modified the IAT probe, contact with the aluminum trumpets falsified the actual temperature measurement, so I designed a plastic bushing to try to thermally separate the probe, for now it seems to work well, I think it is already I have solved all the hardware problems, all I have left to do is fine-tune the tables

[Spidii]

I was also working on some controllers for the oil temperature with a platinum PT100 probe and the EGT with a type K probe, this way I can monitor the oil temperature and EGT in speeduino and in the instrumentation clocks that I have

[Spidii]

Controller egt and oil temp