For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
No its the 6 pin connector at the left slck, mosi, miso, vcc, gnd and reset, is used to get a hex file loaded, so you can also load the bootloader with it.
So this evening I added some more features to my board. But first i opened a Github account and posted the schematics sofar. ... -04-03.pdf

Please take a look and shoot. It is comming along nicely, Still have some space left over where I want to put the onboard Wideband chip.

Again I like the blitzboard.

Some pictures of today:

HHmm I can"t upload pictures... w.t.f.
Geo, there has been a forum software update today, due to spamming. He is still sorting the settings out :)
I can edit now though :D

Change the iat correction curve? Presumably its go[…]

hardware & firmware version?

0.4.3d is the latest THT board, I think the refere[…]


As @LPG2CV mentioned already, you are running deve[…]


But the cam only goes to count2 on the max. So […]

Still can't find what you're looking for?