- Sun Mar 27, 2016 5:06 pm
#6830
Thought i'd share this if anyone, like me, wants to experiment with input signals using the MAX9926 instead of the LM1815.
The Eagle libraries being used are these:
adafruit.lbr
wirepad.lbr
pinhead.lbr
Maxim_By_element14_Batch_1.lbr
The board is through-hole except for the MAX9926, making it easy to alter during use.
It's also below 100x100mm, which will be around 25$ if ordering 5 or 10 boards from PCBWay.com including shipping.
Make sure to share alterations and improvements to the circuit so we can make it even better for everyone.
Included in the archive is both the Eagle schematic and board files.
The Eagle libraries being used are these:
adafruit.lbr
wirepad.lbr
pinhead.lbr
Maxim_By_element14_Batch_1.lbr
The board is through-hole except for the MAX9926, making it easy to alter during use.
It's also below 100x100mm, which will be around 25$ if ordering 5 or 10 boards from PCBWay.com including shipping.
Make sure to share alterations and improvements to the circuit so we can make it even better for everyone.
Included in the archive is both the Eagle schematic and board files.
Attachments
(35.87 KiB) Downloaded 336 times
- By ruckusman
- By panjaycee
- By Brandon
- By PSIG