- Sat Mar 26, 2016 12:47 pm
#6805
Brilliant!
I used the new TunerStudio Beta v2.9.104a, with the latest .ini file and now it reconnects every time and the sketch runs straight away. Away from the PC, if use a separate power source then it starts straight away. That covers the two 'operational' scenarios.
If I connect the Arduino to the PC for power then it still takes the 9 seconds to start, but with TS running it is pretty much instant. Result!
I used the new TunerStudio Beta v2.9.104a, with the latest .ini file and now it reconnects every time and the sketch runs straight away. Away from the PC, if use a separate power source then it starts straight away. That covers the two 'operational' scenarios.
If I connect the Arduino to the PC for power then it still takes the 9 seconds to start, but with TS running it is pretty much instant. Result!
When all is said and done, there's a lot more said than done.