V0.4.3c component positions.

V0.4.3c component positions.#51436

By turbo1200 - Sat Jun 26, 2021 5:53 pm

- Sat Jun 26, 2021 5:53 pm #51436

Hi all,
I bought a v0.4.3c, with all the components, but the packets with components does not have the locations printed on them.
How can I find out where each resistor, diode, etc goes?
Any help would be greatly appreciated.
Hermann.

Re: V0.4.3c component positions.#51440

By dazq - Sat Jun 26, 2021 9:29 pm

- Sat Jun 26, 2021 9:29 pm #51440

Fairly simple, lookup the components in the bom , that specifies it's component number eg Rx for resistors, Cx for capacitors and so on. X is the number of the part not its value by the way.
You can always double check the part number AND value via the schematic too!

Quantum Coupe with V04 on Ford 1.4CVH,Quantum 2+2 with Custom V04 on Jaguar 3.0l AJ30 V6
mini GPIO :done More soon
CANbus broadcast interface: done
Simple sd logger :done
External CAN io: Inputs :done
Gearbox controller: working

Re: V0.4.3c component positions.#51458

By turbo1200 - Mon Jun 28, 2021 12:00 am

- Mon Jun 28, 2021 12:00 am #51458

Thanks mate. Got it.