Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
The dizzy itself has 4 wires going to it, a blue, a yellow, and a black going to the igniter and black/orange one going to the coil itself. Now looking in the wiring diagram would be great but the wires on my loom don't match the diagrams I've found. From what i understand the black/orange is the 12v feed because it was also connected to the injector wires.

Random question but I think there are a few bike […]

just a heads up that some times diagrams are shown[…]

r8 vag coil weird problem 1uz

Do picture how you do wire

Hardware recommendation

I plan to use the ua4c. I've become more educated […]

Still can't find what you're looking for?