- Sun Oct 11, 2020 5:08 am
#45793
I have simple idea - want to share. May be someone will implement or help me to implement.
If will be benetifiar for model RC engines.
I believe it is possible create simplest ECU which will calculate injection duration and ignition angle based only on rpm. No other sensors. Small tune can be performed by mechanical fuel pressure regulator. In future it can be separate board which regulate fuel pressure by simple circuit board (themperature and barometric corrections). I would be happy to find someone who can help me in electronics to do this joint project from the scratch and will do all mechanical stuff and testing.
In this case processor should perform 1000th times fewer calculations will be cheap and reliable.
If will be benetifiar for model RC engines.
I believe it is possible create simplest ECU which will calculate injection duration and ignition angle based only on rpm. No other sensors. Small tune can be performed by mechanical fuel pressure regulator. In future it can be separate board which regulate fuel pressure by simple circuit board (themperature and barometric corrections). I would be happy to find someone who can help me in electronics to do this joint project from the scratch and will do all mechanical stuff and testing.
In this case processor should perform 1000th times fewer calculations will be cheap and reliable.