Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any questions you have before you begin buying, building and installing.
By theonewithin
#44601
Pddy95 wrote:
Wed Aug 05, 2020 5:41 pm
@theonewithin Gpio Mini or dxcontroller I mean.

So if I wire one of the unused arduino Pins to the proto area or an external Board I could use them, when I define the function in tunerstudio? Ground something between x rpm and y rpm if coolant temp is above z as example?
No.

It's not available as aditional inputs to do things like that currently.
By dazq
#44608
Pddy95 wrote:
Thu Aug 06, 2020 9:33 am
Ok, that means, I will need an external mega to get more GPIO's, 'cause Software is at the moment limiting. Right?
Yes that is correct , speedy doesn't have the programmable output support you are looking to use, so yes a second mega with gpio is an option until then.
Honda B16A2 Trigger patterns

Thanks for the input guys... All of these waveform[…]

2CV 602 flat twin

@Edce You should really start your own project. :)[…]

if it has a CH340 USB chip, try a short USB cabl[…]

Subaru hard start

You need to post your tune and a log during issue […]

Still can't find what you're looking for?