Help with building your Speeduino, installing it, getting it to run etc.
By Paul
#43958
Hello, My tps has 2 sensors on it one 3 pin and a switch to activate it. I've tried hooking up only the 3 pin to my Speeduino without any readings. I also tried feeding the switch 5v to try to get something out of the tps. I tried reversing the polarity and still nothing. Do you guys have any ideas on what I could try to get this thing to work? The engine is in a Nissan 240sx with a wiring specialties harness.
By Paul
#43959
Here are some pictures
Attachments
IMG_20200627_171823.jpg
IMG_20200627_171823.jpg (4.93 MiB) Viewed 140 times
IMG_20200627_171648.jpg
IMG_20200627_171648.jpg (5.04 MiB) Viewed 140 times
IMG_20200627_171619.jpg
IMG_20200627_171619.jpg (4.59 MiB) Viewed 140 times

The IRLB3034 may work better? https://www.infine[…]

MX5/Miata PNP on 1.8 issues

@D0nny94 As for the tachometer. If you do ne[…]

Thanks Eric for pointing me to that one, basical[…]

... Thanks for picking this up - some good wo[…]

Still can't find what you're looking for?