For anything you'd like to see added to Speeduino
User avatar
By Eric H
#43793
Is there an easy way to get an oil temperature gauge?
There doesn't seem to be a way to configure an extra temperature gauge.
It's the last piece of the current dashboard that isn't integrated into the ECU.
Future uses could be rev limiting and boost limiting based on oil temps. No caning the car until it's warmed up!
By dazq
#43806
If it's not already available an additional local input can be added via the aux in setup. The wiki explains how to do that, and a post on here explained how to make a custom gauge too.
User avatar
By Eric H
#43816
Dazq,
It's one thing to get a voltage reading on the pin, that's trivial.
I want the Steinheart-Hart calcs running on the ECU like the other thermistor temperature sensors.
I want the datalog to have the temperature in it, not the voltage.
By dazq
#43829
Eric H wrote:
Sat Jun 20, 2020 4:46 pm
Dazq,
It's one thing to get a voltage reading on the pin, that's trivial.
I want the Steinheart-Hart calcs running on the ECU like the other thermistor temperature sensors.
I want the datalog to have the temperature in it, not the voltage.
That's not exactly what you first asked for!
Gauges can be created in TS that show the correct unit and that data could be added to the data log list in the ini if you wanted to.

Also q1 gets very hot when the ecu is plugged in t[…]

Connecting Cam Sensor

I found detailed informations. It is a hall sensor[…]

Tuner Studio installation

I got it, the driver was already installed, the ar[…]

@plazomat Not sure if there is still interest in t[…]

Still can't find what you're looking for?