For any add-on boards such as VR conditioners, optos and OEM interface boards
By Sepehr20mg10
#41841
Some time ago I was searching for the MAX9926 chip to install the Speedy on my new car that came with a VR Sensor on Crankshaft. as I was unable to find the chip so I decided to design a simple OP-AMP version of VR Conditioner board but some day I asked on Slack to see if anybody did it before me! Surprisingly Vitor_BOSS gave me a schematic and that was awesome.
Its working great yet so I decided to design a PCB for that.

I made it with "Altium Designer" for both version (LM324 & LM358)

So here is some screen shots and files available :
LM324_SCH.PNG
LM324_SCH.PNG (21.7 KiB) Viewed 7521 times
LM324_PCB.PNG
LM324_PCB.PNG (65.03 KiB) Viewed 7521 times
LM358_PCB.PNG
LM358_PCB.PNG (49.23 KiB) Viewed 7521 times
Gerber files are attached!
And a big thanks to Vitor Boss to providing me this great schematic
Attachments
(18.25 KiB) Downloaded 413 times
(11.74 KiB) Downloaded 386 times
By Sepehr20mg10
#45525
alfabit wrote:Hi, do you have the schematic in hi res? what's the value for Q1?
Sorry for my late answer.
Q1 is 2N7000
here is a the hi res SCH :
(106.99 KiB) Downloaded 424 times
Chipboy wrote:Nice work indeed, professional boards!
My pleasure
By hamjayahk
#47845
I've tried this circuit on my e30m40 with stock vr sensor and it did work but had too much hysteresis on the input. The 1K variable resistor cant hold correct values so i'll try with 4,7k ohm variable resistor

Sorry for my bad english
VVT and oil pressure

I have a B18C6 Vtec engine and will run the VVT so[…]

IMG_1432.jpeg IMG_1431.jpeg [/img]

Appreciate a bit of help with a pair of 2017 to 20[…]

Voltage ±10% is fine for testing. Note GM […]

Still can't find what you're looking for?