SammyPati wrote: ↑
Tue Feb 11, 2020 1:23 pm
hi and thanks for your reply ,
when I built a Mega-squirt 3 (10 years agog) there were plans to roll out future features like Sequential injection etc and If I remember correctly it was done through the MS Extra board . I guess I was referring to something like that .
I will check the Wiki again, Im hoping there are future plans to allow for Sequential up to 6/8 cylinders and VVT, even if it requires an expansion board or some type of add on board to control the extra injectors.
so from what you are saying I should go fro the V0.3 board then .
I saw a Video on the Speeduino Teensy (ARM) adapter board too, which I want to investigate , but for now I'll build buy the V0.3 board
thanks for your help
A few speeduino distributors have touted potential designs for expansion boards to their own products. There are also a few third party boards with 6 and 8 cylv outputs, nickz has some products like that supporting teensy ,stm32 as well as mega.
The v03 range of boards are only really meant for testing and have been touted to be discontinued, a v04 with the screw terminal (st04) expansion psig designed may be a better way to go
Personally I have mainly used v04 but they fit my needs well on current projects.
Quantum Coupe with V04 on Ford 1.4CVH,Quantum 2+2 with Custom V04 on Jaguar 3.0l AJ30 V6
mini GPIO :done More soon
CANbus broadcast interface: done
Simple sd logger :done
External CAN io: Inputs :done
Gearbox controller: working