- Mon Aug 28, 2023 2:46 am
#64625
yes you have to edit ignition and injector channels in globels. 3 ignition and 6 injection
walinsky wrote:I just wanted to verify if I can use the Spartan2 without the O2 connector on the v2.2 board; just using the M30B35 engine loom, which already provides for a lambda sensor.yes stock o2 wiring can be used
TIA
walinsky wrote:Before putting it in my car, I wanted to do some checks. When I put tunerstudio in test mode, the leds blink with the spark driver test. However the injector driver leds won't blink.you have to add 12v pin 37 with v2.2 board make sure you have F2 soldered or otherwise jump the pads
Is this normal behaviour?
I've managed to dig up a few obscure wiring diag[…]
Still can't find what you're looking for?