[Randoom]

Hey guys, if i am using the stock sensor on the m20b20 should i use the "Cam Sensor Power" jumper on the back of the board ? If so, should i set it to 5 or 12v ?

[Raku]

Hey guys, if i am using the stock sensor on the m20b20 should i use the "Cam Sensor Power" jumper on the back of the board ? If so, should i set it to 5 or 12v ?

no add a jumper between 2 and 3 on SJ1 and leave rest. you need max9926 vr conditioner board