For anything you'd like to see added to Speeduino
#31933
Perhaps drive the one injector with all four channels, setting each firing by angle in Settings > Injector Characteristics > Injector Close Angle > Individual Channel Setting. Of course, your Req_fuel would have to be adjusted in order to only permit each channel to fire 1/4 of the available time. This is just an idea that might work. Injector control may be difficult at low loads, and very limited in flow at high loads.

David

you could set 'skip revolutions' to 3, then it wou[…]

Hi, I am trying to assign Signed values to the x-a[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?