Any general discussion around the firmware, what is does, how it does it etc.
#710
Per the subject, because things are still changing so much in the lead up to a actual release, anytime you grab some new code from github, whether it be one of the zips or just a fresh pull, make sure you reload the speeduino.ini file from the reference directory into your Tuner Studio project.

To do this, just go the File->Project->Project Properties, check the box for 'Other / Browse' and then select the speeduino.ini file that is in the codes reference directory.
#729
Hey Josh,

Just a heads up to let you know that the latest firmware (14 hours old) is broken and won't open with tuner studio, even with the latest ini.
I have started tracking down the fault and hopefully should have the answer soon, but basically what i have found so far is that the new decoder code is the culprit.

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?