[robertfontaine]

... Before I have 5 boards made and 2 populated (such a waste) ... I should ask.... Does anyone want to sell me their extra Rev3.0 PCB?

Thanks,
rf

[pazi88]

Been quite busy lately, but finally I got bit of a time to work on this project now. New rev3.1 board available at GitHub: https://github.com/pazi88/Speeduino-M5x ... 0documents

Basically same as older ones, but the NLA TO220 injector FETs have been replaced with SMD ones and other small tweaks done for the board. Regarding the earlier questions on the BOM, there is quite many alternative components and components that are really for my own special use. So it's normal to have unpopulated components on the board. So use the BOM that has only the needed components listed.

And to make things as simple as possible, I added the boards available to PCBWay site with correct BOM and everything to order: https://www.pcbway.com/project/sharepro ... a9a41.html

They can hunt for alternative components etc. if the ones on BOM aren't available at the time of ordering, so it should be simple and easy process to get the boards. Also if you order from that link, I get small commission which is highly appreciated.

Note! The board is currently under review on PCBWay site, so wait until tomorrow to make sure it's the latest 3.1 revision that's available there.