- Thu Feb 13, 2025 8:42 am
#70832
IMG_3789.jpeg (3.31 MiB) Viewed 994 times
Hello fellow motronic tinkerers!
I have a question about the board reset function in the latest motronic speeduino.
I have fully assembled board with all the reset components and the board resets every time when plugged in to computer. The position of the switch doesn’t have any effect.
Am I missing something or have I forgotten something in this equation. I have bench tested my boards functions in my bech tester and I can clearly see that the LEDs for ignition and injection channels stop blinkin for a few moment after pluggin to computer.
I hope the the main designer Raku will also see this.
-Paavo, Finland
I have a question about the board reset function in the latest motronic speeduino.
I have fully assembled board with all the reset components and the board resets every time when plugged in to computer. The position of the switch doesn’t have any effect.
Am I missing something or have I forgotten something in this equation. I have bench tested my boards functions in my bech tester and I can clearly see that the LEDs for ignition and injection channels stop blinkin for a few moment after pluggin to computer.
I hope the the main designer Raku will also see this.
-Paavo, Finland
- By PSIG
- By Laudper
- By jonbill