Any questions you have before you begin buying, building and installing.
By Laudper
#70390
Hi everyone,

After a failed install of a legacy Megasquirt 1, I am looking at a new Speeduino unit and seeking advice and any considerations before taking the plunge.

The engine is a Subaru EJ25D DOHC which I have put a 36 tooth wheel on (and so planning to run 36-2-2-2). The ignition is a separate ignitor/dual coil pack setup. It runs wasted spark.

Any thoughts on which ECU would suit?
By cyrille
#70508
Hello,
I had been driving for several years with a speeduino 0.4.4.c on a subaru wrx ej20g (wheel 6/7) with great success.
good luck with your project

With no space for a distributor, what are you usin[…]

The question is about Cold Advance: it is mention[…]

EFI for single cylinder

Hello, Have you ever worked something out?

Another thought on ignition timing. Have you disa[…]

Still can't find what you're looking for?