Any questions you have before you begin buying, building and installing.
#70466
Hello everyone, I have made a board with version 0.3.6, and currently the connection to the computer is normal, as are the TPS IAT CAL and other sensors. Now when I input RPM signals, the speed response is correct from 0-8000, but the fuel injector does not respond. I can control the fuel injector using hardware testing, but I am not sure what the problem is with the settings. The entire system is not working properly. I tried to connect the high-voltage pack behind me, but the 4424 chip was smoking and burned.... I don't know what's wrong. The main problem is that the fuel injector doesn't work. Please help me solve this problem

I don't know the signal form, so I would try jumpe[…]

Voltage ±10% is fine for testing. Note GM […]

6 Cylinder Sequential

Really? Chamber pressure is going to be about at[…]

Ktm 990 turbo

How is this project going? I'm in the process of […]

Still can't find what you're looking for?