For any add-on boards such as VR conditioners, optos and OEM interface boards
By keanecn
#70430
Sepehr20mg10 wrote: Thu Jan 09, 2025 3:07 pm
keanecn wrote: Thu Jan 09, 2025 1:47 pm Do you have a regular component version? Because the patch is too difficult to weld
Design on a proto board you mean?
Yes, because SMD is still quite difficult for manual soldering, making a regular one is more convenient for production
By keanecn
#70870
Hello, thank you for designing this circuit board. Now I would like to make a board for testing. Do you have the Gerbers file for LM358? So I can directly call the factory to produce, thank you. I also made one for 9926, but the effect doesn't feel very good. I want to try yours
User avatar
By DStage
#70894
This is an interesting concept. i cannot exactly get the principle of operation though. Maybe I haven't stared at the schematic long enough :lol: I guess I could simulate that...

Anyway, you could try a somewhat similar concept I made some time ago perhaps with some modifications if it suits you better: viewtopic.php?t=4954 I see I haven't shared the gerbers for it, hmm, strange and unlike me ;) I can if you want them.
RPM spikes

Thank you both so much, it's working well enough t[…]

Subaru EJ25 DOHC

Ensure you turn off the hardware test when crankin[…]

The only part of this project that I've done enoug[…]

Idle advance control

Generally timing will be added (positive values) i[…]

Still can't find what you're looking for?