Any general discussion around the firmware, what is does, how it does it etc.
#70425
xcmexico wrote: Thu Jan 09, 2025 7:09 am Hi! Have you tried modifying firmware to decode the 3 teeth equal spacing trigger pattern found on Lexus IS200, IS300 1G-FE, and 2JZ VVTi?


Thank you!
Officially supported since 202402

https://github.com/speeduino/speeduino/ ... tag/202402
https://github.com/speeduino/speeduino/pull/1040

Appreciate a bit of help with a pair of 2017 to 20[…]

I don't know the signal form, so I would try jumpe[…]

Voltage ±10% is fine for testing. Note GM […]

6 Cylinder Sequential

Really? Chamber pressure is going to be about at[…]

Still can't find what you're looking for?