[darreng]

I have a project using a C2C board on a Eurostyle go Kart powering a race tuned Ducar Honda GX clone.
The kart is up and running (still need to fine tune) the tunerstudio has a nice stable connection to the C2C via usb, I have a switch that disconnects the bluetooth HC-05 when I'm not using it.
My problem seems to be a fairly common one:
The bluetooth disconnects and reconnects to the Pixel3 phone every 5secs or so. I'm currently trying to use RealDash. I loaded up realdash's speeduino ini file on their server.
I've not been able to get shadow dash working due to lack of knowledge regarding the correct ini file location and loading for the program.
I searched the internet and think I may have found an ini file on github. I'll give it a go the weekend, but I'm still not sure. I've asked for some sort of tutorial from EFI but I've only had an original response of "have you loaded the correct ini file" DIY-EFI has a tutorial on their YT channel, unfortunately the ini file internet page no longer exists.
Any help or direction would be helpful.
cheers
Darren

[darreng]

Tried shadow dash, doesn't like Android12, asks for a newer version of shadow dash.
Purchased a couple of new hc-05, I'll set them up on the arduino for the speeduino when they arrive.
D

[dazq]

You need to use the matching ini file for the firmware you have installed on your speeduino board.
You cannot mix them about.
The ini would normally be downloaded with the firmware package.

[darreng]

I can see ECU definition in tuner studio, all MS no speeduino, any idea where the actual speeduino/tunerstudio ini file is located, everyone keeps saying load the correct ini file, finding it is another matter, I've even opened up speedyloader looking for it there, any help pointing me in the right direction would be greatly appreciated.
I've let tuner studio choose the file destinations, so all standard, no special files
cheers
Darren

[jonbill]

I think that if you've downloaded the firmware with speedyloader, the speeduino.ini file will be in your downloads folder.
Can you not search your computer for it?

[darreng]

I've looked in my downloads folder and have this:

#unset enablehardware_test

[MegaTune]
MTversion = 2.25

queryCommand = "Q"
signature = "speeduino 202402"
versionInfo = "S" ;This info is what is displayed to user

[TunerStudio]
iniSpecVersion = 3.64

I've tried this ini file before and the apps don't like it
This is why I'm still asking for guidance.
I've just received 2 new HC-05.
I'm going to reinstall the apps and go from there. The Pixel phone is just being used for this display, it doesn't even have a sim card. It relies on my home wifi for internet access.
cheers
Darren

[jonbill]

That is the start of the 202402 firmware speeduino.ini. So if you're using 202402 firmware, it's the right ini file.
If the apps 'don't like it' then either you've not successfully configured it as the ini file in RealDash, or there's another of the frequently occuring incompatibilities between speeduino firmware & ini file & RealDash,

[darreng]

Cheers.
I'll keep you posted
Darren