[Mykk]

It would be very useful to give us the option of Lower Than for the 2nd Fuel/Spark tables too. Perhaps even give us Clt as a conditional.

Also, another idea, we've got ASE that's Clt based. How about giving us the same ASE for IAT too, help us combat the heat soak lean out. Just a thought.

[PSIG]

… How about giving us the same ASE for IAT too, help us combat the heat soak lean out. Just a thought.

Sometimes a workaround for this can be your IAT Density settings. I use a long log to get typical maximum IAT temperatures, then set IAT Density Corrections above typical max IAT for rich. It doesn't work well for certain stuff, such as boosted applications that hit high IAT temps in normal operation, but could ease or solve some issues.

Else, a list of inputs (attached to filters?) configurable for min/max "limp-home" values, or out-of-range levels to a default value would be useful for other inputs as well? E.g., IAT max value <=110°, else limp-home 50°C value. Or, IAT max value <=110°, and hold that max limit value at any higher value. Just some ideas. One option from years ago was to use CLT value for IAT during ASE on start. Or, move your IAT, which was the popular option 20 years ago.

Lots of ways to approach this I think, but every app has different response.