- Wed Sep 04, 2024 5:07 am
#69384
![Screenshot_from_2024-09-03_20-36-24[1].png](./download/file.php?id=13354&sid=b0e41914a7d6f705794c037f6e318c95)
Screenshot_from_2024-09-03_20-36-24[1].png (140.55 KiB) Viewed 229 times
![Screenshot_from_2024-09-03_21-50-43[1].png](./download/file.php?id=13353&sid=b0e41914a7d6f705794c037f6e318c95)
Screenshot_from_2024-09-03_21-50-43[1].png (140.13 KiB) Viewed 229 times
I have a geo metro engine, 3 cylinder with a 36-2-2-2 wheel crank sensor and LS d585 ignition coils.
Im using a Chevy vortec (1997ish v8) crank sensor.
The car runs decent but it will stall at low RPMS randomly, and misfire at higher RPMS.
The tune lists it as a 6 cylinder but I enabled wasted spark and simultaneous injection, this seems to work better than running as a 3 cylinder. Not sure if the crank pattern supports anything but 4 and 6.
Im using a Chevy vortec (1997ish v8) crank sensor.
The car runs decent but it will stall at low RPMS randomly, and misfire at higher RPMS.
The tune lists it as a 6 cylinder but I enabled wasted spark and simultaneous injection, this seems to work better than running as a 3 cylinder. Not sure if the crank pattern supports anything but 4 and 6.
Attachments
(41.34 KiB) Downloaded 15 times
(49.13 KiB) Downloaded 17 times
(61.61 KiB) Downloaded 17 times
- By dazq
- By jonbill