Any questions you have before you begin buying, building and installing.
By Mauro Cabello
#68299
Im doing a fuel only project on a CG 150cc engine I need the fuel pump but I cant find something that would work for me. I need a In line fuel pump for a 125cc injector that works around 40 PSI.
By BroKingScooters
#68622
I just picked one off amazon with the lowest fuel flow. It is a little bigger than I want. but 35 bucks, external regulator for 20. Again, they are way big, but a good start till a suitable alternate can be sourced from aliexpress.
Attachments
20240615_194353.jpg
20240615_194353.jpg (2.43 MiB) Viewed 869 times
20240614_144250.jpg
20240614_144250.jpg (2.44 MiB) Viewed 869 times
User avatar
By PSIG
#68623
I have used an inlet adapter fitting to convert an in-tank pump to inline pump. Search for a "30mm fuel pump" or "scooter fuel pump" to see what you can find to work with? Measure and search sites like McMaster.com or fuelpumps.com for some example fittings. Good luck!
User avatar
By digmorepaka
#68626
I can recommend the Suzuki 15100-03H11(or rather the 20$ clone on aliexpress). 35L/h, capable of ~4.5bar. I think that's the one that PSIG is talking about as well.

Cool 8-) would be nice to have it CAN based, li[…]

thank you all for your advice and your involvement[…]

RPM Help In Tuner Studio/Speediuno

Hey thank you, my plan was to 3d print a trigger w[…]

Rolled the test bed engine out today to determine[…]

Still can't find what you're looking for?