- Fri Apr 26, 2024 2:24 am
#68164
Hi guys,
I've finally had enough of the obscenely complicated mechanical carburetor on my 1992 Suzuki Carry DD51B
It has a 658cc naturally aspirated F6A 3 cylinder gas engine
I've got a NO2C and a throttle body from a 2014 Honda CBR250R motorcycle that I was originally planning on using for my '65 Ducati project, but when the carb on my truck quit working, I figured I'd try it on there instead.
A similar TB was used on the same engine in this thread:
viewtopic.php?t=2489
but that was from 5 years ago and we don't know if he ever got it going.
I was hoping to get a little farther along before needing to beg for help, but it seems I'm stumped right out of the gate. My TB has a 5 pin sensor pack on it comprising TPS, IAT, & MAP. But I can't seem to figure out the pinout on it. Of course Honda has put different versions of this sensor pack out that all look identical, mine has the number 2418A silkscreened onto it, but no other distinguishing markings aside from the brand Keihin.
I've managed to dig up a few obscure wiring diagrams across the internet, but if someone has any advice on how to attach this literal and figurative black box to my NO2C, I would be extremely appreciative.
I've finally had enough of the obscenely complicated mechanical carburetor on my 1992 Suzuki Carry DD51B
It has a 658cc naturally aspirated F6A 3 cylinder gas engine
I've got a NO2C and a throttle body from a 2014 Honda CBR250R motorcycle that I was originally planning on using for my '65 Ducati project, but when the carb on my truck quit working, I figured I'd try it on there instead.
A similar TB was used on the same engine in this thread:
viewtopic.php?t=2489
but that was from 5 years ago and we don't know if he ever got it going.
I was hoping to get a little farther along before needing to beg for help, but it seems I'm stumped right out of the gate. My TB has a 5 pin sensor pack on it comprising TPS, IAT, & MAP. But I can't seem to figure out the pinout on it. Of course Honda has put different versions of this sensor pack out that all look identical, mine has the number 2418A silkscreened onto it, but no other distinguishing markings aside from the brand Keihin.
I've managed to dig up a few obscure wiring diagrams across the internet, but if someone has any advice on how to attach this literal and figurative black box to my NO2C, I would be extremely appreciative.
Attachments
20240425_221801.jpg (1.1 MiB) Viewed 356 times
sensor wiring.jpg (158.36 KiB) Viewed 356 times