For any discussion not specifically related to your project
#67731
No, but as you can program any part of Speeduino to work in any way, the drive-by-wire was not included as it could easily become a danger with poor or accidental setup or use. Commercial DBW cannot be configured like Speeduino. It is also a large processing load if designed well for function and redundancy, and adds more chips and cost to the design in order to have safety cross-check and advanced functions (economy, emissions, torque control, etc). Put all of that together, and it was simply left out for you to use the DBW/ETC of your choice that works for your needs.

To me, this is a smart move, as most want more functions than a simple throttle control. Modern DBW can accomplish many things with many features, so it's either a foot-follower, or capable of many modes. There is no way to predict what you need for yours, so that is left to you to decide and add the right type to your system. 8-)

He's quite prolific with respect to video and elec[…]

I’m thinking it’s the voltage regulato[…]

HAHA Thank you! Ok got it the outer part of the […]

+1, I use old driver versions in my Windows machin[…]

Still can't find what you're looking for?