- Fri Mar 29, 2024 12:33 pm
#67704
I've been away from playing cars for a few weeks, whilst dealing with some mental health issues, today I got back on with the NO2C install, when I built the loom I managed to get 2 of my 3 identical plugs mixed up pin 1 of plug 1 is 5v to the TPS, pin 1 of plug 3 is the main 12v feed into the ECU, I've fried the Arduino, but have I damaged anything on the NO2C?
I'm off to a corner to cry for a while.
D
I'm off to a corner to cry for a while.
D