- Fri Mar 15, 2024 3:37 pm
#67529
Hi,
I'm going to put my hands on a "weird" project, a T-Jet swapped Lancia Y 840 with its original gearbox. So I was wandering if there is a way to display on the original dash all the analog data fed to the Speeduino, as the VSS, RPM, AFR and Turbo pressure (these two on an external gauge obviously) etc. Will it work if I connect the signal from the sensor both to Speeduino and the gauge? Do I need double amount of sensors and also keeping the original ECU (Magneti Marelli IAW 16F.EB)?
I'm going to put my hands on a "weird" project, a T-Jet swapped Lancia Y 840 with its original gearbox. So I was wandering if there is a way to display on the original dash all the analog data fed to the Speeduino, as the VSS, RPM, AFR and Turbo pressure (these two on an external gauge obviously) etc. Will it work if I connect the signal from the sensor both to Speeduino and the gauge? Do I need double amount of sensors and also keeping the original ECU (Magneti Marelli IAW 16F.EB)?
Attachments
original dash has magnet motors, no steppers
Dash.jpg (72.96 KiB) Viewed 279 times
Dash.jpg (72.96 KiB) Viewed 279 times