Reworked Introduction

Reworked Introduction#67318

By Logicaluk - Tue Feb 27, 2024 9:22 pm

- Tue Feb 27, 2024 9:22 pm #67318

I have reworked the introduction for the manual. This is a first draft
Let me know what you think.
Dan

Attachments

SMM 1-1 v1 Intro.pdf

(271.43 KiB) Downloaded 29 times

Re: Reworked Introduction#67414

By dazq - Wed Mar 06, 2024 8:18 am

- Wed Mar 06, 2024 8:18 am #67414

I feel it should be mentioned that "most" of the designs available are of the shield variety , but there are some which have the MCU (of various types) soldered directly to the board and do not need the MCU board too.

Quantum Coupe with V04 on Ford 1.4CVH,Quantum 2+2 with Custom V04 on Jaguar 3.0l AJ30 V6
mini GPIO :done More soon
CANbus broadcast interface: done
Simple sd logger :done
External CAN io: Inputs :done
Gearbox controller: working

Re: Reworked Introduction#67417

By Logicaluk - Wed Mar 06, 2024 10:07 am

- Wed Mar 06, 2024 10:07 am #67417

dazq wrote: ↑Wed Mar 06, 2024 8:18 am I feel it should be mentioned that "most" of the designs available are of the shield variety , but there are some which have the MCU (of various types) soldered directly to the board and do not need the MCU board too.

Good point I'll add it in.