Any general discussion around the firmware, what is does, how it does it etc.
By JB21
#66439
I tried it with arduino ide- shall I try VS instead?

I opened it with the speeduino.ino inside of the speeduino folder.

Thanks !!
User avatar
By jonbill
#66444
I believe its all meant to build in the Arduino IDE, but all development is in platformIO, so I'd definitely make the switch.
By LPG2CV
#66445
Do I recall there is an add on to the ide for stm? Long time since I've done this. :)
By JB21
#66543
So I am still getting this error.

Is there no how to for dummies? :D I also tried VS but I am currently running in the forest :roll: .


Thanks guys and have a great new year!
User avatar
By jonbill
#66544
In VS/platformio, you need to make the platformio.ini section for env:Black_F407VE look like this, and select the Black_F407VE for build where my 'hand' pointer is at the bottom of the screen.
Screenshot 2024-01-02 at 14.02.30.png
Screenshot 2024-01-02 at 14.02.30.png (515.77 KiB) Viewed 1611 times
User avatar
By fuqiangjia
#66617
I have encountered problems in 202310 firmware compilation, do you know how to do it
Attachments
1704550331757.png
1704550331757.png (108.75 KiB) Viewed 1452 times
User avatar
By moussie369
#67270
Hi, has anyone tried to install 202402 through platformio ?
I was able to get it working when installing it with arduino IDE (worked with both the usb port and an rs232 dongle on PA9,PA10) but it won't work with platformio, I tried changing the build flags to see if I could get it to work but still nothing in TS
User avatar
By jonbill
#67271
I can certainly build and upload master, which I don't think has moved on since 202402 yet - what errors do you get?
  • 1
  • 27
  • 28
  • 29
  • 30
  • 31

No worries. Life gets in the way. A lot. See yo[…]

STM32 development

So here's a little update on the subject of my pas[…]

NO2C crank signal issues

Also sometimes when i turn the ECU off it seems to[…]

I don't think there can be another cause - it'll b[…]

Still can't find what you're looking for?