For anything related to the 'official' Speeduino boards (Eg v0.3, v0.4 etc)
#53429
Hello, im willing to buy a V0.4 PCB to partially populate it for 1 injector and 1 coil, i'm in Europe

I found at ebay v0.4.3c and v0.4.3d versions, I also saw at official store at speeduino.com that the last release is d, but I was not able to find what's the difference or new features/ corrections for the d compared to c.

Where can i find that logchange or do someone knows the differences?

Thank you!
#67095
Hi Guys,

I was wondering why the 2W 160 Ohms resistors (R25, R27, R31 and R32) on the ignitor output present on V0.4.3 board were deleted on board revision V0.4.3d

The wiki just says: New THT design but no more. Why were the present on the first place and removed after? I put screenshot to support my words


V0.4.3
V043.png
V043.png (433.18 KiB) Viewed 2361 times
V0.4.3d
V043d.png
V043d.png (84.55 KiB) Viewed 2361 times

No worries. Life gets in the way. A lot. See yo[…]

STM32 development

So here's a little update on the subject of my pas[…]

NO2C crank signal issues

Also sometimes when i turn the ECU off it seems to[…]

I don't think there can be another cause - it'll b[…]

Still can't find what you're looking for?