Any questions you have before you begin buying, building and installing.
User avatar
By TurboPirate
#66715
Hello to you all, Happy New Year 2024.
This Car came from factory with manual transmission, F.I. ignition is mechanical and vacuum advanced, I will use my 0.4.3C to eliminate the Air Flow Meter (Flapper Type) since the car is having issues and no way to diagnose, previous owner cut a lot of cables including the diagnostic terminal, the plan is to keep the ignition as is, since the TPS on this car is not a potentiometer just a switch at idle and another switch at WOT we were planning on using a throttle body from a Ford Escort with on/off IAC sensor or Cavalier 2.2L throttle body with stepper IAC sensor. If it's a must to go with ignition control we have questions, can we use the ignition eliminate the mechanical and vacuum advanced with some trigger wheel inside? Or adapt a 60-2 wheel I have around? Thanks in advance.......TP

Hi there, I'm doing preliminary research and hope[…]

BMW E23 M30B28

Where did the plugs come from? I've heard there ar[…]

Injected 2 stroke Bultaco

Alternator testing. Its a 3 phase circa 200w alter[…]

NO2C crank signal issues

Once again PSIG, thank you. Note this is set up fo[…]

Still can't find what you're looking for?