Any strange behaviour, crashing issues etc, post them here! Problems compiling the firmware should go in the General support section rather than here
User avatar
By jonbill
#65942
You can have a 2nd wideband o2 sensor, but its for logging/display only - doesn't take part in fuelling corrections (but that should be OK).
You can use wasted spark on a 270° engine, you'll just need 2 ignition channels. (So you'll need a coil with 2 trigger inputs).

Hello I have a ua4c board and I just finished tuni[…]

If you want the simplest/easiest setup then you c[…]

Tach output and RPM sensor issues

Hi, I am in the process of converting the ignition[…]

BMW E23 M30B28

I'll figure out the tach eventually, but now there[…]

Still can't find what you're looking for?