[Bartosz D]

Greetings.
I have been slowly gathering parts for a M111 conversion with a supercharger, and I have been wondering what it takes to hook it up to the speedunio. I have tried searching everywhere but only result Im getting is that the speeduino got 1 channel for boost control, and its here that im getting lost on what to do next. Currently got an Eaton M62 charger sitting, and by the little knowledge ive got is that it has a clutch linkage in it which is computer controlled.

thanks in advance.

[jonbill]

I think its a simple electronic clutch switch, so possibly the VVT output or a programmable output could manage it. Or I understand you can get a non clutch m62 and just run it permanently connected.

[PSIG]

Agreed, there are several approaches to operating a supercharger, optional clutch, and optional air bypass system. We may be able to help with the logistics of control, but it is your choice what to control, when and how. Let us know what you want to do.

[torfinnmykj]

Hi!
Do you have a DIY for wiring/sensors and firmware for Speeduino on mercedes M111 compressor?