[PSIG]

Opened Idle settings on fresh standard Base Tune for 202207.1, and on first setting, got caught in a a loop it would not let me leave. Had to shut TS down through Task Manager.

Entered first setting (shown), and it popped 3 pop-up windows, where clicking "OK" would close one, but re-pop below the others, in a never-ending cycle. Is there an alternative way out to change settings or close without crashing it?

Caught in a loop.jpg (56.54 KiB) Viewed 8158 times

[jonbill]

I couldn't find a way out of it either
note there are 2 alternating popups actually:

Screenshot 2023-08-05 at 10.03.17.png (79.44 KiB) Viewed 8091 times

Screenshot 2023-08-05 at 10.03.30.png (80.46 KiB) Viewed 8091 times

I think the problem is caused by this definition in the ini file:

Code: Select all

    iacMaxSteps         = scalar, U08,     154,     "Steps",     3,    0,  0,  {iacStepHome-3},    0

I.E. when your iacStepHome is set to 0, the default value is set to -3, which turns out to be below the minimum so it gives an error dialog and resets to 0 which is above {iacStepHome-3} and gives an error dialog. something like that anyway.
@noisymime

[jonbill]

https://github.com/noisymime/speeduino/issues/1080

[PSIG]