[Spidii]

Looks good! You should be able to add more teeth to your trigger disc, and remove one, to allow full sequential using Missing Tooth (Cam) decoder.

supposedly I only need 1 shot on the cam for sequential injection I understand, right?

[PSIG]

There are different options with different decoders. You can use a separate cycle signal ("cam" sensor), or you can use a missing tooth at cam speed and just one sensor.

[Spidii]

There are different options with different decoders. You can use a separate cycle signal ("cam" sensor), or you can use a missing tooth at cam speed and just one sensor.

I am currently using a PSA 1.6 HDI, 60-2 wheel on the crankshaft and the idea is to use the camshaft signal to manage the sequential injection and the wasted spark, so if I have not misunderstood in the wiki, with a single shot on the cam should do the trick. As I progress I will inform you, thank you very much for the help

[Spidii]

https://youtube.com/shorts/wU--qZa092A?feature=share

A video of the original 205 tach running with speeduino output and a small electronic circuit, also shift light managed with speeduino programmed output

[Spidii]

I have already modified the distributor disk to use as a cmp. It is printed in nylon with fiberglass.

[Spidii]

I have also mounted a damper for reading the map and have started with the electrical installation

[Spidii]

I have located the iat where I hope to obtain a reading that is as real and fast as possible.

[Spidii]

The fuel line and the ISC valve are now ready.

[Spidii]

It's been a long time since I've been here, I've had the car running with speeduino for a while. I'm very happy with the result.

[PSIG]

Excellent!